Pumps

CTS has partnered with Calpeda, high quality pumps from Italy. From hot water circulation pumps, booster pumps, centrifugal pumps and submersible pumps, we can supply a pump for your pumping requirement.

Pumps Enquiry form

Need more information on Pumps? Contact us via the form below, and we will get back to you as soon as possible.

First name

Last name

Email Address

Telephone Number

Your Message

Products in Pumps

Circulation Pump NC3

Booster Pump

Centrifugal Suction Pump N4

Self Priming Pump

Submersible Pump

Multistage Submersible Pump

Brands in Pumps

Other categories in Pumps

From hot water circulation pumps, booster pumps, centrifugal pumps and submersible pumps, we can supply a pump for your pumping requirement.

Variable Speed Drives

CTS supplies variable speed drives and soft starters from a few hundred watts to 1.2MW as well as solar driven VSDs for pure off gird applications.

Signaling

Measurement

Soldering

Laundry

Freshwater

Our Brands | See all Brands

Our Projects | See all Projects

Supply, Delivery and Installation of 2 Autoclaves and an Effluent Treatment System for Central Veterinary Laboratories

Ministry of Agriculture

2015

CTS ensures that your system is designed for your requirements. With our years of experience, we not only install, but also service and maintain the equipment today, and in the years to come.

With our extensive knowledge in sterilization and infection control, CTS installed suitable autoclaves with BSL3 seals. In addition to the autoclaves, an effluent treatment system was also installed. This system collects the effluent from the autoclaves, sinks and wash basins, and collects it in one tank. Once a certain level has been reached, a second tank will collect the effluent, while sterilization begins in the first tank. In this way, collection of the effluent is not delayed whilst sterilization is being performed in one of the tanks. Through this system, the highest level of decontamination is achieved, ensuring a safe environment.

CVL is classified as a BSL 3 laboratory. BSL 3 means a biosafety level of 3. This is a level of bio-containment precautions, required to isolate dangerous agents, which may cause serious diseases. This includes various bacteria, viruses and parasites. CVL required autoclaves with a BSL3 seal approval, as well as an effluent treatment system, to decontaminate a wide range of aqueous liquids.

CTS was awarded the tender to supply, deliver to site, installation, testing and commission of two autoclaves and an effluent treatment system for CVL.

Design, Supply and Installation of an Off-Grid PV System at Farm Heinrichsfelde

Private

2019

A 7,3 kWp off-grid PV system was installed at the farm Heinrichsfelde in the Aus area with a Lithium-ion battery. The system is able to power an entire farmhouse. Remote monitorng and supervision is included.

System Specifications are:

24 x 305W Renesola PV modules
2x Victron MPPT 150/85
1x Victron Quattro 48/10000
1x BlueNova Lithium-ion battery 48V-24kWh
Roof mounted with structure for IBR roof sheeting
AC surge and lightning protection

Manufacture, Supply and Installation of 3 Automatic Weather Stations in Northern Namibia

Ministry of Agriculture

2019

Ministry of Agriculture through, through SASSCAL funding, did acquire 3 automatic weather stations in 2018 which where finally installed in 2019 after sites have been determined. These stations from part of the existing SASSCAL weather station network that has been established over the past years. All stations conform to SASSCAL requirements and are inline with WMO standards.

The stations are installed at :

Dudukabe (Zambezi)
Okalongo (Ohangwena)
Omafo (Ohangwena)

Station info can be obtained from www.sasscalweathernet.org

Supply and Installation of Automatic Weather Stations at Kanovlei and Koichab Pan

National Botanical Research Institute

2014

National Botanical Research institute approached CTS to upgrade two of their existing AWS to satellite communication and subsequent installation at Kanovlei in the Tsumkwe Area as well as Koichab Pan close to Lüderitz.

Communication is via Meteosat satellites and based on a “fire and forget” principal which unfortunately does not allow remote maintenance procedures.

The stations form part of the SASSCAL Weathernet and measure all important meteorological parameters.

Weather data can be viewed at: www.sasscalweathernet.org

Installation of 10 Automatic Weather Stations in Botswana

University of Hamburg

2014

CTS was approached by the Botswana Meteorological Department and the University of Hamburg with the request to install automatic weather stations across Botswana. A total of 10 stations were engineered and build at our workshop in Windhoek prior to installation commencement. With our own tower design, the installation time is reduced to nearly 8 hours per tower.

The stations are equipped with sensors from Vaisala, Kipp and Zonen. At the heart of each station is the CR1000 logger from Campbell Scientific. Each station is capable to measure the following:

Wind speed
Wind direction
Humidity
Air Temperature
Irradiance
Barometric pressure
Ground Temperature
Rain
Leaf wetness

In addition to the above parameters the following parameters are calculated by the logger by means of mathematical models.

Dew point temperature
Wet bulb temperature
Sunshine duration

The data from the station is transmitted to ftp servers situated in Gaborone/Botswana as well as Hamburg/Germany on an hourly bases over locally available GSM network providers. Once the data is uploaded to the server in Hamburg, it is processed and posted on a publicly available website. This website collects data of numerous stations across Namibia, Botswana, Zambia, Angola and South Africa for research purposes. A total of 8000km was covered in just under 4 weeks.

Pumps - Pumps - Our Products | Central Technical Supplies