Boilers

Boilers of various sizes are commonly found in the “Food and Bev” industry for the generation of hot water or steam. We offer full turnkey solutions with minimal hassles to the client. Our product range of boilers and accessories are of highest quality.

Boilers Categories

Steam & Hot Water Boiler

CTS can provide a wide range of burners, boilers and accessories.

Heat Exchanger

Transferring heat energy from one medium to the next requires high efficiency heat exchangers, be it for pool heating or temperature control in process, we do have an answer.

Gaskets and Insulation

Insulation is key in reducing energy losses. Propper insulation not only protects against possible bodily harm but also reduce monthly operational costs.

Signaling

Freshwater

Weather

Oil Filtration

Our Brands | See all Brands

Our Projects | See all Projects

A La Mer Laundry - Swakopmund

for A La Mer Laundry

2017

When A La Mer Hotel in Swakopmund decided to expand, they approached CTS with a unique challenge: to create a functional laundry that was both energy and water efficient, and would also fit into a small space, while being whisper quiet, so as not to disturb any guests. In addition, the laundry has to perform excellently, producing quality wash, tumbling and ironing results. Only one brand came to mind: Miele.

Miele recently launched new bench mark machines, which have short program cycles, excellent spin performance, a redesigned patented honeycomb drum and have low consumption values. A La Mer Hotel was the first in Namibia to purchase these new machines.

CTS installed washer extractors with water recovery units, as well as automatic dosing systems, to ensure the best quality wash, every time. The tumble drier has an air recycling system, saving up to 60% of energy. And with a matching drying ironer, optimum finishing results are achieved. Small accessories made this laundry a complete turn key solution.

Part Refurbishment for Rundu State Hospital Laundry

Ministry Of Health And Social Services

2014

CTS removed old and obsolete laundry equipment and installed new machines.

The installed equipment consisted of:

2 x new Primus FS40 high speed washer extractors
2 x Maytag energy saving tumble dryers
1 x Miele through-feed drying ironers
inculding laundry trolleys, ironing trolleys and other small accessories

Installation of 5 Automatic Weather Stations in Botswana with Satellite Communication

University of Hamburg

2015

Based on our excellent service and knowledge we have rendered to the Botswana Meteorological Department as well as University of Hamburg, CTS was able to secure the 2nd Phase of the manufacture, supply and installation of automatic weather stations in Botswana.

The stations supplied to make use of satellite communication due to the extreme remoteness of the sites, these were:

Mababe (Savuti Marsh)
Tubu (Okavango)
Baines Drift (Eastern Botswana)
Xade (Central Kalahari Game Park)
Ngwaltle (Western Botswana)

These stations are not located at any Meteorological Department property, thus fences had to be erected for protection against animals.

Station design is based on our well proven tripod mast with all relevant sensors and a CR1000 logger as the processing unit. Data is transmitted at fixed timeslots allocated by EUMETSAT (Germany) on an hourly basis. Satellite transmission is based on a fire and forget principle, thus no remote maintenance can be done.

Weather data can be found at: http://www.sasscalweathernet.org .

Refurbishment of Outapi State Hospital Laundry

Ministry Of Health And Social Services

2014

CTS removed old and obsolete laundry equipment and installed new machines.

The installed equipment sonsisted of:

3 x new Primus RS35 washer extractors
3 x Maytag energy saving tumble dryers
2 x Miele through-feed drying ironers
including laundry trolleys, ironing trolleys, hand-irons and ironing tables

Hybrid photovoltaic system for Gcwatjinga Clinic

Gcwatjinga Clinic

2015

An off gird PV system with generator back up was installed at the Gcwatjinga clinic south east of Rundu. The system comprises of the following components:

6.24 kW PV array
2x Victron BueSolar 150V/70A MPPT regulator
600Ah Battery capacity
Inverter/Charger, Victron Multi, 48V/8000VA
System Monitoring (BMV700, Color Control GX)

The clinic was connected to the grid, which at time of system design and installation the grid connection plans were unknown to the engineer. As the clinic has PV installed, the existing system has been configured such as to allow for grid connection once the batteries reach a predefined SOC. This guarantees a continuous supply of power to the clinic and nurse houses.

In addition to the grid, a backup generator is incorporated in case PV as well as grid failure occur.

Boilers - Our Products | Central Technical Supplies

Boilers Categories

Side Pannel