Medical - Our Products | Central Technical Supplies

To prevent the spread of diseases, medical waste needs to be disposed of in the correct manner. The only allowable method by law in Namibia is incineration. We supply a wide range of incinerators with proven technology and full technical support country wide.

Medical Categories

Autoclaves

Sterilization in laboratory and hospital environments has its unique requirement. Choosing the right steam sterilizer depends on several considerations: load diversity, frequency of use, available services and load volumes.

Incinerators

Incinerators form part of a waste treatment process as hazardous waste is incinerated (combustion of organic material under high temperatures), converting the material into ash, exhaust gases and heat. Infections germs are destroyed and chemical substances converted to their base elements (drugs are destroyed).

Waste Converter

An alternative form to incineration is waste conversion. Any form of waste is shredded beyond recognition and then sterilized under pressure with steam. Germs, bacteria and viruses are destroyed.

Disinfector

Without proper disinfecting of medical instruments diseases can spread rapidly form patient to patient in hospitals. It is thus of utmost importance that all medical instruments are 100% germ free.

Oil Filtration

Power

Freshwater

Weather

Solar

Our Brands | See all Brands

Our Projects | See all Projects

Refurbishment of the Van-Eck Transformer Oil Storage Facility

Nampower

2015

CTS was successful in winning the tender for the refurbishment of the transformer oil storage plant at the van Eck Power station. The project included the following:

Cleaning and painting of all oil tanks
Automating the entire plant
Installation of oil filtration system

Old as well as new transformer oil is stored in different tanks. Color codes on the tank clearly indicate what type of oil is stored in each tank. Old oil – oil removed from transformers during service – is stored until enough has been collected before it is sold.

Clean/new oil is stored in the other thanks that will be used for refilling transformers during routine services. Humidity tends to form inside the oil when it is stored for longer periods. This humidity as well as other dirt particles are removed my means of the Alfa Laval Oil Filtration plant. The process is fully automated and PLC controlled. The operator merely is required to enter the quantity of oil that is to be filtered.

Radar level sensors are installed in each tank to monitor quantity on hand. Maintenance free breathers on each tank prevent access of water moisture into the tank and the buildup of dangerous gases.

A Coriolis custody transfer meter accurately indicates the quantity of old oil the is transferred to third party tankers for selling purposes.

Supply of Solar Resource Measurement Station to NUST

Namibia University of Science and Technology

2016

Central Technical Supplies was approached by the University of Stellenbosch to take part in a tender to supply a solar resource measurement station to the Namibia University of Science and Technology in Windhoek.

We were successful in winning the tender. The station is based on the Kipp and Zonen Solys 2 sun tracker with CMP 10 Pyranometer and CHP1 Pyrheliometer.

The station is based on the CR1000 logger from Campbell Scientific and measures wind speed and direction as well as ambient temperature, humidity and rain in addition to the solar resource data.

Containerized off-grid solar solution for the Omusati Region

Ministry of Mines and Energy

2013

CTS was awarded the first ever containerized off-grid solar electrification tender for the Ministry of Mines and Energy beginning of 2013. This project entailed:

Upgrading of all government building wiring as per national standard for 9 sites in the Omusati region
Manufacture, supply and install container power units for these sites.

The power containers consisted of ca 2.8kW of PV modules installed on the roof as well as 3,000 to 4,500 Ah of battery capacity depending on site requirements. Five KVA inverter charger and two 70A Blue Solar Charge regulator all from Victron Energy complete the system.

With a total of nine containers, school, hostels and other government buildings were electrified. Each container was subdivided into two rooms for batteries and inverter technology respectively.

With our 36T/m crane truck CTS was able to transport the container to site, navigating through thick sand with ease.

New Laundry for Palmwag Lodge, Damaraland

Palmwag Lodge

2017

This paradise in the Damaraland is a popular tourist destination. Being located in a remote area, they demanded reliable machines, with the highest quality, that are also versatile. Miele machines are able to tackle everyday laundry problems – safely, conveniently and economically.

With the many years of experience, CTS provided Palmwag Lodge with a complete solution. We know that reliability is a key requirement, to ensure trouble free working, while maintaining the highest of standards. CTS, the ideal solution to any situation.

Supply, Delivery and Installation of a Gas Fired Water Heating System for Hilton Hotel Windhoek

Hilton Hotel Windhoek

2010

CTS was awarded the tender to install a water heating system for the Hilton Hotel Windhoek.

The system was installed according to the following specifications:

• 2x 250kW gas fired hot water boiler

• 2x 6800 liter hot water storage tank (also known as calorifier)

• 1x Danfoss Aqua drive 11kW for glycol circulation pump control

• 2x Automatic bypass valves to control water temperature inside tank

• 4x Hot water circulation pumps

The boilers as well as glycol circulation pumps and one hot water storage tank were installed in the boiler room located in the upper basement of the hotel. The second hot water storage tank is installed on the 9th floor of the Hilton Hotel. A glycol circulation system connects the two calorifier with the two gas fired hot water boilers. The glycol circulation pumps are controlled from one Danfoss Aqua drive with cascading functionality to control the pumping speed depending on the temperature in the glycol line.

Each hot water boiler is cycled on a 24 hour basis, should the glycol temperature fall below a predetermined threshold for certain period of time the second boiler will start automatically.

Automatic bypass valves guarantee that the water temperature of each calorifier is kept at a constant 60 – 65 degrees Celsius.

Medical - Our Products | Central Technical Supplies

Medical Categories

Side Pannel