Gas Detection

Health and safety are becoming ever more important in any workplace, especially when working with gasses. Virtually all industrial gases can be detected, be it NH3, CO 2, CO, CI2, O2, SO2, O3 and many more.

Handheld instruments as well as permanently installed instruments connected to a central SCADA systems are available.

Typical Applications include:

Industrial gas monitoring
LPG gas leakage detection
Mobile or fixed gas detection system and many more

Gas Detection Enquiry form

Need more information on Gas Detection? Contact us via the form below, and we will get back to you as soon as possible.

First name

Last name

Email Address

Telephone Number

Your Message

Products in Gas Detection

Carbon Dioxide Detector

Portable Multigas Detector

Handheld Multigas Detector

Gas Detector for Wastewater Installation

IR Gas Detector for Marine flammable Gases

Brands in Gas Detection

Other categories in Monitoring

To protect against a wide range of industrial gas hazards, CTS offers a wide variety of gas detection instruments for virtually any industry. Be it waste water or petrochemical industry, winery and brewery or even a boiler operator.

Gauges

Gauges are the most common instrument to quickly and easily indicate process parameters such as temperature or pressure. From small to large dial, back entry bottom entry, lower pressure high pressure, thermometers, the range is endless. We do have an option that suits your requirements.

Temperature Monitoring

Temperature monitoring in the food and beverage industry is crucial, we offer specialized products that meet stringed requirements of the “Food and Bev” industry.

Soldering

Weather

Freshwater

Medical

Laundry

Our Brands | See all Brands

Our Projects | See all Projects

Containerized off-grid solar solution for the Omusati Region

Ministry of Mines and Energy

2013

CTS was awarded the first ever containerized off-grid solar electrification tender for the Ministry of Mines and Energy beginning of 2013. This project entailed:

Upgrading of all government building wiring as per national standard for 9 sites in the Omusati region
Manufacture, supply and install container power units for these sites.

The power containers consisted of ca 2.8kW of PV modules installed on the roof as well as 3,000 to 4,500 Ah of battery capacity depending on site requirements. Five KVA inverter charger and two 70A Blue Solar Charge regulator all from Victron Energy complete the system.

With a total of nine containers, school, hostels and other government buildings were electrified. Each container was subdivided into two rooms for batteries and inverter technology respectively.

With our 36T/m crane truck CTS was able to transport the container to site, navigating through thick sand with ease.

Supply, Delivery and Installation of 2 Autoclaves and an Effluent Treatment System for Central Veterinary Laboratories

Ministry of Agriculture

2015

CTS ensures that your system is designed for your requirements. With our years of experience, we not only install, but also service and maintain the equipment today, and in the years to come.

With our extensive knowledge in sterilization and infection control, CTS installed suitable autoclaves with BSL3 seals. In addition to the autoclaves, an effluent treatment system was also installed. This system collects the effluent from the autoclaves, sinks and wash basins, and collects it in one tank. Once a certain level has been reached, a second tank will collect the effluent, while sterilization begins in the first tank. In this way, collection of the effluent is not delayed whilst sterilization is being performed in one of the tanks. Through this system, the highest level of decontamination is achieved, ensuring a safe environment.

CVL is classified as a BSL 3 laboratory. BSL 3 means a biosafety level of 3. This is a level of bio-containment precautions, required to isolate dangerous agents, which may cause serious diseases. This includes various bacteria, viruses and parasites. CVL required autoclaves with a BSL3 seal approval, as well as an effluent treatment system, to decontaminate a wide range of aqueous liquids.

CTS was awarded the tender to supply, deliver to site, installation, testing and commission of two autoclaves and an effluent treatment system for CVL.

Pioneerspark Medical Centre

2017

Pionieerspark Medical Centre can call themselves a proud owner of a 38kW photovoltaic grid feed system. Considerable savings on the monthly electricity bill are achieved as most of the electricity requirements are produced directly at the customer. Excess energy is fed back into the grid and credited on the monthly electricity bill by City of Windhoek.

The system consists of 144 265W PV modules mounted flat on the roof of the building with 2 Fronius three phase grid feed inverters and remote monitoring via the Fronius App on the cell phone. Remote monitoring allows CTS to advise the client on possible faults and recommended actions to be taken.

Refurbishment of the Van-Eck Transformer Oil Storage Facility

Nampower

2015

CTS was successful in winning the tender for the refurbishment of the transformer oil storage plant at the van Eck Power station. The project included the following:

Cleaning and painting of all oil tanks
Automating the entire plant
Installation of oil filtration system

Old as well as new transformer oil is stored in different tanks. Color codes on the tank clearly indicate what type of oil is stored in each tank. Old oil – oil removed from transformers during service – is stored until enough has been collected before it is sold.

Clean/new oil is stored in the other thanks that will be used for refilling transformers during routine services. Humidity tends to form inside the oil when it is stored for longer periods. This humidity as well as other dirt particles are removed my means of the Alfa Laval Oil Filtration plant. The process is fully automated and PLC controlled. The operator merely is required to enter the quantity of oil that is to be filtered.

Radar level sensors are installed in each tank to monitor quantity on hand. Maintenance free breathers on each tank prevent access of water moisture into the tank and the buildup of dangerous gases.

A Coriolis custody transfer meter accurately indicates the quantity of old oil the is transferred to third party tankers for selling purposes.

Supply and Installation of Laundry Equipment at Katima Mulilo State Hospital

Ministry Of Health And Social Services

2011

CTS was awarded the tender in July 2011 for Katima Mulilo’s Hospital laundry. The scope of the work included the supply, manufacture and assembly, delivery to site, installation, testing, commissioning and maintenance of laundry equipment.

Safety is born of experience. In the field of clinical practice, medical know-how and professional laundry care ensure optimum treatment and care of patients. For this, systematic cleaning, disinfection, drying and sterilization of linen and operating garments are prerequisites for avoiding risk to both patients and staff.

Katima Mulilo’s Hospital has to process over 1 ton of laundry per day. Our high speed washer extractors have a spin factor of 830rpm, greatly reducing tumbling time. With built in soap dispensers, the correct amount of soap is used each time, and the perforated lifting ribs mean more mechanical action and lower water consumption. The high speed washers significantly reduce water and electricity consumption, and still ensure hygienically clean laundry.

Miele offer rotary ironers with roller diameters ranging from 210 to 500 mm. Aluminium heater plates instead of steel guarantee an excellent distribution of heat and considerably reduced heating up times. The foot control ensures that the roller can be easily stopped, eg. for steaming.

A pneumatic lifting device creates a high pressure ironing action for an excellent finish. Katima Mulilo’s Hospital has the largest Miele rotary ironers in Namibia.