New Laundry for Palmwag Lodge, Damaraland - Laundry - Our Projects

Palmwag Lodge Date: 2017

This paradise in the Damaraland is a popular tourist destination. Being located in a remote area, they demanded reliable machines, with the highest quality, that are also versatile. Miele machines are able to tackle everyday laundry problems – safely, conveniently and economically.

With the many years of experience, CTS provided Palmwag Lodge with a complete solution. We know that reliability is a key requirement, to ensure trouble free working, while maintaining the highest of standards. CTS, the ideal solution to any situation.

Gallery

Our Products | See all Products

Monitoring

Weather

Automation

Boilers

Measurement

Our Brands | See all Brands

Our Projects | See all Projects

Supply, Delivery and Installation of 2 Autoclaves and an Effluent Treatment System for Central Veterinary Laboratories

Ministry of Agriculture

2015

CTS ensures that your system is designed for your requirements. With our years of experience, we not only install, but also service and maintain the equipment today, and in the years to come.

With our extensive knowledge in sterilization and infection control, CTS installed suitable autoclaves with BSL3 seals. In addition to the autoclaves, an effluent treatment system was also installed. This system collects the effluent from the autoclaves, sinks and wash basins, and collects it in one tank. Once a certain level has been reached, a second tank will collect the effluent, while sterilization begins in the first tank. In this way, collection of the effluent is not delayed whilst sterilization is being performed in one of the tanks. Through this system, the highest level of decontamination is achieved, ensuring a safe environment.

CVL is classified as a BSL 3 laboratory. BSL 3 means a biosafety level of 3. This is a level of bio-containment precautions, required to isolate dangerous agents, which may cause serious diseases. This includes various bacteria, viruses and parasites. CVL required autoclaves with a BSL3 seal approval, as well as an effluent treatment system, to decontaminate a wide range of aqueous liquids.

CTS was awarded the tender to supply, deliver to site, installation, testing and commission of two autoclaves and an effluent treatment system for CVL.

6kw grid feed photovoltaic system installed in Klein Windhoek

Private

2011

CTS was approached by a senior resident of Klein Windhoek to install a grid-tied photovoltaic system with the aim to cut back on the monthly electricity bill. The system included:

42x 130W photovoltaic modules and mounting structure
1x 6kW grid tied inverter

The system is designed such as to generate an estimated 900kWh per month.

Hybrid photovoltaic system for Gcwatjinga Clinic

Gcwatjinga Clinic

2015

An off gird PV system with generator back up was installed at the Gcwatjinga clinic south east of Rundu. The system comprises of the following components:

6.24 kW PV array
2x Victron BueSolar 150V/70A MPPT regulator
600Ah Battery capacity
Inverter/Charger, Victron Multi, 48V/8000VA
System Monitoring (BMV700, Color Control GX)

The clinic was connected to the grid, which at time of system design and installation the grid connection plans were unknown to the engineer. As the clinic has PV installed, the existing system has been configured such as to allow for grid connection once the batteries reach a predefined SOC. This guarantees a continuous supply of power to the clinic and nurse houses.

In addition to the grid, a backup generator is incorporated in case PV as well as grid failure occur.

Installation of 10 Automatic Weather Stations in Botswana

University of Hamburg

2014

CTS was approached by the Botswana Meteorological Department and the University of Hamburg with the request to install automatic weather stations across Botswana. A total of 10 stations were engineered and build at our workshop in Windhoek prior to installation commencement. With our own tower design, the installation time is reduced to nearly 8 hours per tower.

The stations are equipped with sensors from Vaisala, Kipp and Zonen. At the heart of each station is the CR1000 logger from Campbell Scientific. Each station is capable to measure the following:

Wind speed
Wind direction
Humidity
Air Temperature
Irradiance
Barometric pressure
Ground Temperature
Rain
Leaf wetness

In addition to the above parameters the following parameters are calculated by the logger by means of mathematical models.

Dew point temperature
Wet bulb temperature
Sunshine duration

The data from the station is transmitted to ftp servers situated in Gaborone/Botswana as well as Hamburg/Germany on an hourly bases over locally available GSM network providers. Once the data is uploaded to the server in Hamburg, it is processed and posted on a publicly available website. This website collects data of numerous stations across Namibia, Botswana, Zambia, Angola and South Africa for research purposes. A total of 8000km was covered in just under 4 weeks.

Installation of 26 Autoclaves Country Wide

Ministry of Health and Social Services

2015

CTS was awarded four tenders in 2015, to supply, deliver to site, install, test and commission of autoclaves throughout Namibia.

In addition to the 160L Steri Tech autoclaves, water softeners were installed to increase the life span of each unit and reduce overall maintenance cost.

A number of installation teams worked hard to complete the project within the stringent timeframe set by the client. Each site came with its own challenges such as:

Removing of existing units that were beyond repair
Low supply water pressure
Space limitations where the new units were to be installed
Breaking out of walls to fit new autoclave

New Laundry for Palmwag Lodge, Damaraland - Laundry - Our Projects | Central Technical Supplies

Gallery

Side Pannel